10 Best DIY Fishing Rod Holder Ideas

DIY fishing rod holder is a versatile and practical solution for fishing enthusiasts seeking order amidst tangled lines and scattered gear. Whether you’re a seasoned angler or a weekend fishing warrior, the need to keep your fishing rods neatly organized is undeniable.

This ingenious creation serves as a space-saving storage solution and adds a touch of personalization to your angler’s haven. The DIY fishing rod case is made mostly from PVC pipes, end caps, and brass cup hooks, all of which are easy to find. It is a cheap choice to expensive commercial options.

In exploring the DIY fishing rod holder, we’ll delve into the materials, assembly steps, and customization options, allowing you to tailor it to your needs.

Say goodbye to the clutter and disarray, and say hello to a well-organized fishing setup that saves space and showcases your angling passion.

Diy fishing rod holder

Source Pinterest

List of DIY Fishing Rod Holder

Following is the list of DIY fishing rod holder:

1: DIY Fishing Rod Holder With Storage

Diy fishing rod holder

Source Pinterest

Creating a DIY Fishing Rod Holder with Storage is a doable project. You’ll need a drill and a table saw. Additionally, gather glue, plywood, TROFAST deep storage boxes, wood glue, castors, paint and a For ster bit.

Take the measurements according to the directions that were supplied. You may alter the size of this holder to store more fishing rods than its maximum capacity of nine rods allows.

Because it’s a simple project that doesn’t need much time or money, and the components are easy to get, it’s a fantastic option for storing your fishing gear.

2: DIY Fishing Rod Holder for Garage

Diy fishing rod holder

Source Pinterest

The DIY Fishing Rod Holder for the garage offers a cost-effective solution to declutter your space. You can craft this holder for less than ten dollars using affordable materials like PVC pipes, end caps, and brass cup hooks.

Its simplicity ensures easy assembly and the provided instructions make the process hassle-free. This holder efficiently stores fishing rods, helping you free up valuable garage space. Plus, it’s customizable, allowing you to create multiple holders to accommodate a growing collection of fishing rods.

It’s a practical and budget-friendly project that enhances organization and tidiness in your garage, keeping your fishing gear neatly organized and easily accessible.

3: DIY Fishing Rod Holder for Car

Diy fishing rod holder

Source Pinterest

To get started, you will need a long wood saw, a measuring tape, a screwdriver, a drill with a Philips head, a pocket full of rubber bands, and a package of rod clips. There is a detailed explanation of where to get each of these components.

Take the wood measurements using the top of your automobile as a reference. It is important to note that to ensure that the rod holder does not fall off, you should consider screwing it into the top of your vehicle. If you don’t want it permanent, you may do away with the screws entirely.

4: Wooden Fishing Rod Holder Plans

Diy fishing rod holder

Source Pinterest

A quick sketch is necessary to help you determine the appropriate proportions and form an accurate mental picture of the finished result. You will need timber in four sizes and measurements to construct the sides, bases, bottom, and support.

When you first start, ensure you have a hammer, screwdriver, drill machine, tape measure, and miter saw on hand. Because you need to perfect the design of the wooden fishing rod holder, completing this project might take up to a day if you have yet to gain experience working with wood.

5: Homemade Fishing Rod Stand

Diy fishing rod holder

Source Pinterest

This magnificent rod stand is crafted entirely out of wood. Because of its size and the fact that it does not use a significant amount of room wherever it is placed, you can store an unlimited number of rods. Therefore, you will want a straight wood piece two by 6 and 8 feet long.

In addition to that, it includes a raised base that may be used to store various fishing gear. Therefore, while constructing one using this guide, you should make every effort to properly follow the directions for the proportions so that the fishing rod stand has the appropriate level of balance.

6:  DIY Fishing Rod Holder

Diy fishing rod holder

Source Pinterest

A DIY fishing rod holder is a homemade device designed to securely store fishing rods, typically using various materials and creative construction methods for anglers’ convenience.

It would be best if you did not rush through this instruction but instead took your time to carefully consider your options before moving further.

The stages are sequentially challenging. Unique materials include tube fabric (GSM 250), inner tube (43x220mm), outer tube (145x275mm), top circle (110 mm), and bottom joint patch (30x70mm).

It would be best if you were very exact and meticulous while making all of these cuts; otherwise, you will have to start from the very beginning, which will result in additional wasted fabric.

You will need a regular ruler for measuring, scissors to cut, and a pencil for making temporary markings.

7: DIY PVC Fishing Rod Holder

Diy fishing rod holder

Source Pinterest

You can see four PVC pipes in this picture; however, you may choose to use five or six. Gather your leftover pieces of wood to use as the foundation, as well as five feet of PVC pipe, screws, ideally drywall screws, a hand drill, a hammer, and a hacksaw.

8:  DIY Basic Fishing Rod Holder

Diy fishing rod holder

Source Pinterest

A DIY Basic Fishing Rod Holder is a versatile project suitable for both indoor and outdoor use. To create it, you’ll need timber pieces (1x4x6 and 1x6x6 inches), various tools such as a drill, tape measure, circular saw, handsaw, and orbital sander, plus screws. Follow the instructions for crafting this practical rod holder.

Because every instrument in this location serves a certain function, you should prioritize acquiring those tools before starting this procedure. You may already have some of these tools, so you won’t have to purchase them from a hardware shop.

You can get help cutting wood at a hardware shop if you need to get up to the task. Just provide us with the measurements. Although there is a limit to the number of fishing rods that can fit in one of these holders, additional ones may be easily fabricated.

9:  DIY Vertical Fishing Rod

Diy fishing rod holder

Source Pinterest

To accommodate the ample wood needed, acquire as many 8-foot wooden planks as possible; with 1.5 planks suffice for each rod rack due to their standard length. That implies you will cut the piece of wood that is 8 feet long down to 4 feet.

It would be best to ensure that all these figures are written down and kept nearby as you work to keep them fresh in your memory and avoid making mistakes.

Therefore, the few instruments you need are a tape measure and a drill, and since the holes need to be large, you need a large adaptor that you can connect to the mouth of the drill.

These are the only equipment that is required. With this vertical fishing rod holder, you have made it possible to store as many fishing rods as you want, but there is a limit to how many you can keep at once.

10:  DIY Rod Holder for a Boat

Diy fishing rod holder

Source Pinterest

A blogger from Insource life came up with a boat fishing rod holder that she made herself for less than $7. This video is ideal for you if you need a single rod holder and have no interest in constructing an entire rod rack since it demonstrates how to make a single rod holder.

PVC pipe, a PVC cap socket, hex bolts, nuts, glue, and a few more tools are all that are required for this project. On this site, you can find all of the measurements, as well as step-by-step images.


Leave a Comment